Donna of Re-surface was telling me the other day, about this giant lampshade she made for a lounge in California , and I loved seeing the process. Here she shares how she made the crate and the giant shade that was sent across the country from New York to Santa Rosa, California. You can see more of Re-Surface and Donna's amazing work by visiting her shop here.
"I make my lampshades in a somewhat traditional fashion using styrene lining, steel frames and paper tape, however where I depart from traditional shade making is that I mount the shade liner with photographic mediums (such as transparencies, canvas or paper) versus fabric, then bind the print to the shade using a special adhesive and sometimes trimming it with archival PH neutral hinging tape (also used in book binding and art framing) *that's what I'm doing in the photo that i refer to as finishing touches :)* i particularly like printing onto/using duratrans (a highly durable transparency medium made by kodak) because it's designed to be backlit, is easy to clean and it's nice & bright! "
First you make a crate! A 65” x 65” x 30” wooden crate is constructed out of ½” plywood (luan), with a pallet built into the crate, to safely transport the giant lampshade to across the country from Brooklyn, NY to Santa Rosa, California. The crate is lined with 2" styrofoam sheets to protect the walls, and a 2nd layer on the bottom for extra protection for the diffuser.
Here I am making the finishing touches. the shade itself is: 48” dia x 48” dia x 15” tall. The support structure was designed to be hardwired onto the fixture, then the shade is slipped onto the "H" shape and secured with screws (much easier than hardwiring a washer top ring) this helps decrease the likelihood of the shade being damaged during installation, and
helps distribute the weight more evenly. All done. time to pack her up!
First I wrapped the shade carefully in a plastic drop cloth, then 2 layers of bubble wrap. The blue tape is used so they can safely and easily remove it during installation. Then the shade is placed inside the crate, loosely surrounded by peanuts. Next I covered with more foam, and sealed the crate. ...and off she goes!!
STIR COCKTAIL LOUNGE
404 Mendocino Avenue, Santa Rosa, CA 95406
Susan Diana Harris Interior Design, susandianaharris.com
Frankie Norstra Photography, frankienorstad.com
Lampshade by Re-surface
RE-SURFACE.net
Featured post
Exciting News! Poppytalk Has Moved!
Exciting news! I have taken the plunge and have moved Poppytalk onto Wordpress (well, a good portion of it anyway —many of the archive po...
Popular Posts
-
Hey friends and happy weekend! Hope your start to December is going well. Just popping in here on the old blog to catch up with any follower...
-
Guest post by Kathryn of Blackbird Letterpress Here are the last photos of the National Stationery Show that I was able to take. And ...
-
Alicia Bock Everywhere I turn, I'm seeing more and more artists responding to the disaster in Japan. It's incredibly heartwarming a...
-
We love this series of fine art prints by Andrea Jenkins of Hula Seventy . So much so we have purchased three to give away here on the blog...
© 2005 - 2021 Poppytalk. Powered by Blogger.
2 comments:
love seeing the process and really love the shade.
What a fabulous shade! WTG Donna!!
Post a Comment